Ningbo FET Building Materials and Technology Co.,Ltd
Ningbo FET Building Materials and Technology Co.,Ltd
Add to Cart
Non-combust Cellulose Reinforced Compressed Dark Grey Fiber Cement Sheet Exterior Wall Panel 100% Free Asbestos
Product Introduction:
Non-asbestos fiber cement siding is made up from portland cement,high strength wire mesh,natural mineral reinforced cement as its main raw material,which is processed by pulping,foring,high temperature with high pressure.The color of its inside and surface are the same for a whole sheet,which make it with outstanding properies and appearance.
Fiber Cement Board is a stable performance and light weight building &decoration board used cement as major and natural fiber reinforced, with the process of pulping, emulsion, forming, pressing, autoclaving, drying and surface treatment.The color is Grey. With the sanding surface, thickness uniformity is better and grain is clearer. And because of the cement,the strength is higher, and waterproof performance is much better.
|
Product
|
Compressed Fiber Cement Board
|
|
Dry Density(g/cm3)
|
1.3-1.4
|
|
Water absorption (%)
|
28-33
|
|
Wet expansion (%)
|
0.2
|
|
Water Content(%)
|
7-13
|
|
Bending Strength(Mpa)
|
16-22
|
| Shrinkage rate(%) | 0.1-0.15 |
|
Frost resistant
|
No delamination and crack after 25cycles under freezing and thawing
|
| Water penetration | No water drop on the board surface |
Product Application:
1. Subway
2. Tunnel
3. Base house and other wet surroundings.
4. Curtain wall, siding, cladding.
5. Siding renovation of old buildings
6. Indoor decoration
Main Features:
Windproof, waterproof, mothproof, resist UV, thermal insulation characteristics.
Specification:
(1). Thickness: 4-24mm
(2). Standard size: 1220*2440mm or 1200*2400mm
(3). Note: other specification is available,such as 915mm*1830mm,1220mm*3000mm
Packaging Details:
1. Hold by Wooden Pallet
2.Covered by PVC and Bonded with plastic belt
3. Fasten around the corners
4. Mounted in container to protect your purchasing.