Ningbo FET Building Materials and Technology Co.,Ltd
Ningbo FET Building Materials and Technology Co.,Ltd
Add to Cart
Fireproof 100% Free Asbestos Interior Wall Panel Light Weight Calcium Silicate Board Partition Siding
Product Introduction:
Calcium silicate board, also called non-asbestos calcium silicate board, is a fiber reinforced calcium silicate board. Higher tensile strength than other inorganic insulation boards. Using silica, calcium oxide and reinforced fiber as raw material, calcium silicate board is made through stirring, heating, gelling, molding, steam curing and drying process. Calcium silicate board is a new type of insulation material .
The raw materials of fiber cement board are cellulose fiber, silicate cement, quartz sand, water and some additives. It's a kind of high-tech product which formed through accurate dosing by computer program, hatcheck craft and compressed by 14000tons hydraulic machine and autoclave under high temperature and pressure.
Specification:
(1). Thickness: 4-25mm
(2). Standard size: 1220*2440mm or 1200*2400mm
(3). Note: other specification is available
|
Product
|
Calcium Silicate Board
|
|
Dry Density(g/cm3)
|
1.2-1.3
|
|
Water absorption (%)
|
33-40
|
|
Wet expansion (%)
|
0.25
|
|
Water Content(%)
|
13-20
|
|
Bending Strength(Mpa)
|
9-16
|
| Shrinkage rate(%) | 0.15-0.2 |
|
Frost resistant
|
No delamination and crack after 25cycles under freezing and thawing
|
| Water penetration | No water drop on the board surface after 24hours |
Product Application:
1. Curtain wall, siding, cladding.
2. Siding renovation of old buildings
3. Indoor decoration
4. Subway
5. Tunnel
6. Base house and other wet surroundings.
Main Features:
Performance like high strength,light weight,fire and water proofing,green and envirmental friendly,high effcient and energy-saving.Therefore,this kind of new materials is vigorously developed and recommedded by the country.
FAQ:
1. Can I visit your factory ?
A: Its welcome! The nearest airport is jieyang airport.
2.. How can I get some samples?
A: We are honored to offer you sample.
3.. How does your factory do regarding quality control?
A: We always attach great importance during whole process.We have professional QC team to control quality..
4. Can you add my logo on the product?
A: Yes, customized logo are welcome. OEM and ODM is OK for us.
5. Can we use our own shipping agent?
A:Yes, you can. We had cooperated with many forwarders. If you need, we can recommend some forwarders to you and you can compare the price and services.