Ningbo FET Building Materials and Technology Co.,Ltd
Ningbo FET Building Materials and Technology Co.,Ltd
Add to Cart
Partition Fireproof Resistant 100% Free Asbestos Light Weight Interior Wall Panel Calcium Silicate Siding
Product Introduction:
Calcium silicate board is light weight, low thermal conductivity, high strength, easy to install, high temperature resistance, corrosion resistance, reliable and durable. it is widely used in electricity, metallurgy, petrochemical, construction, shipbuilding and other areas of equipment, piping, wall and roof insulation and fire insulation.
It is a kind of new building and industry boards,Due to its goods performance in fireproof, moisture-proof and sound insulation and durability. So it is the ideal decoration boards for ceiling board and partition boards.
Our products are of good moisture resisting ability.In high humidity places such as laundry room,it can still maintain stable performance,doesn’t generate swelling or shaping,so its durability is 3 to 5 times as that of the other materials.
|
Product
|
Calcium Silicate Board
|
|
Dry Density(g/cm3)
|
1.2-1.3
|
|
Water absorption (%)
|
33-40
|
|
Wet expansion (%)
|
0.25
|
|
Water Content(%)
|
13-20
|
|
Bending Strength(Mpa)
|
9-16
|
| Shrinkage rate(%) | 0.15-0.2 |
|
Frost resistant
|
No delamination and crack after 25cycles under freezing and thawing
|
| Water penetration | No water drop on the board surface after 24hours |
Product Application:
1. Attic panel for loft steel structure;
2. exterior wall cladding panels;
3. Interior wall partition board;
4. External & interior insulation composite panels;
5. Floor plates;
7. Waterproof wall in the kitchen or wash room;
8 .Decoration board for Interiors & Exteriors wall;
9. Explosion-proof
10.Fireproof board roof sheathing.
Main Features:
1.100% Non-asbestos,environmental friendly;
2. Fireproof,waterproof and humidity resistance
3. Moisture preserving,thermal insulation and energy saving;
4. Lightweight and earthquake resistance
5. Good property of sound-absorbing and sound insulation;
6. Easy installation
Specification:
1) Thickness:4.5-25mm;
2) 100% non-asbestos;
3) variety of colors,good appearance;
4) it can be sawed,planed,nailed,drilled;
Note:
1) When carrying the board, two persons raise the board's two long sides
2) It's better to carry the board vertically, if the board's thickness was smaller than 6mm , suggest carrying two pieces of board simultaneously
Partition Installing Method:
1. Galvanized Metal Frame
a. The top and bottom keels are fixed respectively top floor and on floor with expansion bolts.
b. The vertical keel should be aligned well according to the requirement (generally being 612 mm) with
laterally supporting keel installed.
2. Board Material Package Fixed
a. Cutting the board material to the dimensions needed (about 10mm lower than wall height)
b. Board material is fixed on keel in anchoring seam way with tapping screw: the interval of tapping screw is generally
about 200~250mm with screws sinking 0.5mm under the board face.
c. The expansion seam of about 4mm between boards should be kept.
d. The shrouding should be fixed from the middle to the four sides and cannot be operated at multipoint simultaneously
to avoid generating inner stress to make board material bucking.
e .Before board being packaged and fixed, depending the needs, glass cotton or rock cotton can be filled.