Ningbo FET Building Materials and Technology Co.,Ltd
Ningbo FET Building Materials and Technology Co.,Ltd
Add to Cart
Facade Decorative Exterior Wall Panel Reinforced Fireproof Fiber Cement Board 100% Free Asbestos
Details
1. Environment friendly/non asbestos
2. Fire proof
3. Moisture proof
4. Thermal insulation & Sound insulation
5. Light weight & High strength
6. Easy working & Long use life
Advantages:
No dust emission,no dust generation,non-oxidation,mold prevention,insect prevention and moth prevention.
It is Acid and alkali resistance,chemical resistanceWear resistance,easy cleaning,low maintenance cost.
Class A1 fireproofing,neither toxic gas emission,nor black smoke in case of buming
Standardized production of the product fiber cement board,site assembly and easy installation
Specification:
(1). Thickness: 4-24mm
(2). Standard size: 1220*2440mm or 1200*2400mm
(3). Note: other specification is available,such as 915mm*1830mm,1220mm*3000mm
Product Introduction:
It's made of autoclaved process under high temperature and pressure which generates a light-weight,durable and smooth-faced board for various applications of interior and exterior decoration.It is strong and flexible board composed of cement,refined ores,reinforced cellulose fiber as the main materials.
|
Product
|
Compressed Fiber Cement Board
|
|
Dry Density(g/cm3)
|
1.3-1.4
|
|
Water absorption (%)
|
28-33
|
|
Wet expansion (%)
|
0.2
|
|
Water Content(%)
|
7-13
|
|
Bending Strength(Mpa)
|
16-22
|
|
Shrinkage rate(%) |
0.1-0.15 |
|
Frost resistant
|
No delamination and crack after 25cycles under freezing and thawing
|
|
Water penetration |
No water drop on the board surface |
Main Features:
1. 100% Asbestos Free
2. Excellent Fire Resistant
3. Excellent Moisture / Water Resistant
4. Good Heat and Sound Insulation
5. High Strength
6. Stable Dimensions
7. Durability and long service life
Product Application:
1. Fire-proof structure
2. Fire-proof ceiling
3. Billboard
4. Water-proof Baffle
5. Washboard
6. Flue board
7. Access foor
8. Cabinets etc.
Installing Method:
1. Galvanized Metal Frame
a. The top and bottom keels are fixed respectively top floor and on floor with expansion bolts.
b. The vertical keel should be aligned well according to the requirement (generally being 612 mm) with
laterally supporting keel installed.
2. Board Material Package Fixed
a. Cutting the board material to the dimensions needed (about 10mm lower than wall height)
b. Board material is fixed on keel in anchoring seam way with tapping screw: the interval of tapping screw is generally
about 200~250mm with screws sinking 0.5mm under the board face.
c. The expansion seam of about 4mm between boards should be kept.
d. The shrouding should be fixed from the middle to the four sides and cannot be operated at multipoint simultaneously
to avoid generating inner stress to make board material bucking.
e. Before board being packaged and fixed, depending the needs, glass cotton or rock cotton can be filled