Ningbo FET Building Materials and Technology Co.,Ltd
Ningbo FET Building Materials and Technology Co.,Ltd
Add to Cart
8mm White Compressed Waterproof 100% Free Asbestos High Strength Fiber Cement Sheet Exterior Wall Panel
Product Introduction:
Fibre cement board is almost maintenance free, extremely weather-resistent, and non-combustible and is designed to have good thermal properties when compared with other building materials. The engineered panels will not rot, warp, shrink, melt, and is resistant to insects.
Fiber Cement exterior wall panel,cement board exterior wall cladding is an environmental friendly,innovative light - weight(non Asbestos) cellulose fibre reinforced cement product that provides high quality full range of applications in ceiling,siding and flooring in a complete system solution.
It is a composite material manufactured from a combination of sand, cement, cellulose fibers and completely natural fibres for an environmentally-friendly and safe building product.
|
Product
|
Compressed Fiber Cement Board
|
|
Dry Density(g/cm3)
|
1.3-1.4
|
|
Water absorption (%)
|
28-33
|
|
Wet expansion (%)
|
0.2
|
|
Water Content(%)
|
7-13
|
|
Bending Strength(Mpa)
|
16-22
|
| Shrinkage rate(%) | 0.1-0.15 |
|
Frost resistant
|
No delamination and crack after 25cycles under freezing and thawing
|
| Water penetration | No water drop on the board surface after 24hours |
Protection wall,scaleboard of furniture ,fireproof scaleboard,movable floor board ,desktop board,shipping and subway engineering,scaleboard for curtain wall ,glass backboard,stell structured board,sound insulative board.
Main Features:
Performance like high strength,light weight,fire and water proofing,green and envirmental friendly,high effcient and energy-saving.Therefore,this kind of new materials is vigorously developed and recommedded by the country.
Packing:
1. Strong wooden pallet(Standard Export Package)
2. Corner protective
3. Plastic Film
4. Protect Board
Secification:
(1). Thickness: 4-24mm
(2). Standard size: 1220*2440mm or 1200*2400mm
(3). Note: other specification is available
Ceiling Installing Method:
1. Carry out ceiling line-measuring to determine the ceiling’s fixed position, the boom’s central range is generally 1200.
2. Connect and fix the boom and main keel with hanging piece to make the main keel keep level position.
3. Vertically fix the sub-keel to the main keel with hanging piece; the sub-keel axis’central range is 612mm.
4. Install the laterally supporting keel properly, its central ranges is 1224mm.
5. Fix the board on sub-keels with tapping screws, and to well the seam-connecting treatment.